Silvercrest SDB 2200 B1 - Manual (Page 8)

6 GB
4.5 Ironing without steam
Delicate fabrics are ironed at low tempera-
tures without using steam. You can use
the spray function to moisten your laundry.
1. Set the steam level controller 13 to
and the temperature controller 9
to MIN.
2. Fill the water tank 8 if you wish to use
the spray function.
3. Set the steam iron into a vertical posi-
tion.
4. Insert the power plug into a wall socket.
The pilot light 1 on the handle 2 lights
up.
5. Select the required temperature on the
temperature controller 9. The temper-
ature control lamp 5 lights up.
6. You can start ironing as soon as the
ironing temperature is reached and
the temperature control lamp 5 is
extinguished.
7. When you finish ironing, set the tem-
perature controller 9 to MIN and
unplug the appliance.
8. Let the steam iron cool down, pouring
out any water left in the water tank 8
through the filler opening of the tank.
4.6 Ironing with steam
Ironing with steam calls for a high temper-
ature, at least temperature level . You
can use the spray function to moisten your
laundry.
1. Set the steam level controller 13 to
and the temperature controller 9
to MIN.
2. Fill the water tank 8.
3. Set the steam iron in a vertical position.
4. Insert the power plug into a wall socket.
The pilot light 1 on the handle 2 lights up.
5. Select the required temperature on the
temperature controller 9 (at least ).
The temperature control lamp 5 lights up.
6. You can select the required steam level
or on the steam level control-
ler 13 and start ironing as soon as the
ironing temperature is reached and the
temperature control lamp 5 is extin-
guished.
Steam will be ...
… produced as soon as you hold the
iron horizontally and
… stop as soon as you hold the iron
vertically or set the steam level
controller 13 to
.
7. When you finish ironing, set the tem-
perature controller 9 to MIN, the steam
level controller 13 to
and unplug
the appliance.
8. Let the steam iron cool down, pouring
out any water left in the water tank 8
through the filler opening of the tank.
4.7 Power steam function
This function calls for a high temperature,
at least temperature level . Here the
water tank 8 has to be at least a quarter-full.
•
Press the Power steam button 15
while moving the iron over the item of
laundry.
• Wait a few seconds before pressing
the Power steam button
again.
TIP: To iron hanging garments you can also
use the power steam function vertically.
5. Cleaning
DANGER! Unplug from the wall
socket before cleaning the steam
iron.
• Leave the appliance to cool down
before cleaning.
CAUTION: Do not use harsh or abrasive
cleaning agents.
__RP_70069_B4.book Seite 6 Dienstag, 1. November 2011 4:08 16