Silvercrest SKAK 120 A1 - Manual (Page 10)

7 SKAK 120 A1
GB
Operation
Using the cable winder
The cable winder can be used to adapt the length of the earphone 1
cable to your needs and for storing the headphones when they are
not being used.
■ Remove silicone cap of cable winder 3 and lead the cable
through the side recesses and the middle bar of the lower shell.
■ Fold over the silicone cap towards the outside and place it on
the middle bar of the lower shell again.
■ Wind one end of the cable around the middle bar until the
required cable length has been reached, and then lead it back
through the recess in the lower shell.
■ Fold the silicone cap back inwards again. Ensure that the recesses
in the silicone cap and the lower shell are in alignment with
each other.
IB_106808_SKAK120A1_LB4.indb 7 27.11.14 14:25