Connections, Connection example – Edirol MA-5D User Manual
Page 15
15
Connections
Precautions When Connecting and Turning on the
Power
921
• To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power on all devices before making any connections.
926_fix
• Using a connection cable that contains a resistor can cause the sound level to be low. Use a
connection cable that does not contain a resistor.
941
• Once the connections have been completed, turn on power to your various devices in the order
specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage
to speakers and other devices. (When turning the power off, reverse this procedure.)
The devices must be turned on in this order.
Connected devices ➔ MA-5D/MA-5A
942
• This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is
required before the unit will operate normally.
Connection Example
fig.5e
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Sound Module, CD Player, MD Player, etc.
MA-5D
only