Silvercrest SWW 1500 A1 - Manual (Page 63)

61
Initial use
SWW 1500 A1
GB
MT
Requirements for the set-up location
For safe and faultless operation of the device the set-up location must satisfy the
following criteria:
The device must only be operated in an upright position and completely assembled. ■
When using the pedestals the device must be placed on a fi rm, fl at and even fl oor. ■
When wall mounting the device must only be mounted in a fi xed position on a ■
verticle wall.
The minimum distances of the housing from other objects must be maintained, they ■
are; 100 mm at the sides, 300 mm above, 150 mm below (with wall mounting)
and 500 mm in front.
Do not stand and/or hang the device in a hot, wet or very moist environment or ■
in the vicinity of fl ammable materials.
The mains wall socket must be easily accessible so that the mains power cord ■
can be easily removed in an emergency.
Environment temperature range: +5 to +45 °C ■
Humidity (no condensation): 5 - 90 % ■
DANGER
Fire hazard through contact with materials!
The risk of fi re exists if the heating elements come into contact
with fl ammable materials!
Do not place and/or hang the device in the vicinity of curtains and other ►
fl ammable materials.
Do not allow fl ammable materials (i.e. draperies) to come into contact with
►
the device.
Do not cover the device.
►
Before initial use
Remove all packaging materials and all transport securing devices from the device. ■
NOTICE
With initial use, for a brief period, a light odour accumulation can occur. ►
This is normal and completely harmless.