Silvercrest SAB 160 A1 - Manual (Page 22)

20
Handling and operation
SAB 160 A1
GB
Search for stations with alternative frequencies
Press the ♦ SCAN/REC button to search for stations with an AF signal in the
VHF band range.
The search stops with each found station for 5 seconds and then continues
searching.
If you want to listen to and save the station press the ♦ SCAN/REC button to
stop the search.
Hold down for approx. 3 seconds one of the station buttons ♦ 1 to 6 to save
the currently set station. The successful saving is signalised by the showing
of the numbers 1-6 in the display.
Accessing saved stations
Select with ♦ BD/ENT the frequency range.
Press one of the station buttons ♦ 1 to 6, to access the saved station.
Automatic saving
Hold down the ♦ AS/PS button for 3 seconds . A search immediately starts
whereby each found station remains for approx. fi ve seconds. The station
indicator and/or the station frequency blinks and the memory slot is dis-
played. With weak stations the search will automatically continue.
Running through saved stations
Press briefl y the ♦ AS/PS button. All stations will be briefl y selected.
When you hear the desired station press the ♦ AS/PS button. The chosen
station remains selected.
Switching alternative frequencies (AF) on / off
You can search for alternative frequencies of a station so that it will always have
optimal reception.
Press the ♦ AF button. In the display appears the indicator AF. The device now
constantly searches for the optimal frequency of the currently set station.
Press the ♦ AF button again to switch the function off . In the display the
indicator AF disappears.
Regional programmes
A few stations broadcast regional programmes.
In order to playback only the station’s regional programme hold down the ♦
AF button until the notice REG ON appears in the display.
To again playback the national programme hold down the ♦ AF button until
the notice REG OFF appears in the display.