Epson 777/777i - Manual (Page 44)

40
Macintosh System Requirements
To use your printer and its software, your system should have:
■ An Apple ® iMac ™ series, Power Macintosh, ® G3, or G4 with USB port
■ Mac ® OS 8.5.1 or later
If your iMac is running OS 8.1, you’ll need to upgrade your operating system
before installing your printer software. If your iMac is running OS 8.5.1, Apple
recommends that you install iMac Update 1.1, available on the Apple web site.
To find out which operating system your iMac is running, select About This
Computer
from the Apple menu.
■ At least 16MB of available RAM (32MB recommended)
■ At least 50MB of free hard disk space (100MB recommended)
■ VGA or better display adapter and monitor
■ Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) or DVD
drive for installing the printer software
■ A shielded USB “AB” cable from Series A (computer) to Series B (printer), up to 6.5 ft.
(2 meters) long
Using an improperly shielded USB cable—especially a cable more than 6.5 ft.
(2 meters) long—may cause the printer to malfunction.
E NERGY S TAR Compliance
As an ENERGY STAR Partner, EPSON has determined that this
product meets the ENERGY STAR guidelines for energy efficiency.
The EPA ENERGY STAR office equipment program is a voluntary
partnership with the computer and office equipment industry to
promote the introduction of energy-efficient personal computers,
monitors, printers, fax machines, and copiers in an effort to reduce air
pollution caused by power generation.