Cleaning and care, Storage – Silvercrest SWK 3000 EDS A1 User Manual

Page 7

Advertising
background image

- 4 -

Cleaning and Care



Danger

Do not open any part of the housing.
There are no user-servicable elements inside.
An open housing can create the risk of a lethal
electrical shock.

Never submerse any parts of the appliance in
water or other liquids! This can create the risk
of a life-threatening electrical shock if residual
liquid comes into contact with powered com-
ponents.



Risk of personal injuries

Before cleaning the appliance, remove the plug
from the mains power socket and allow the appliance
to cool down.

• Clean the exterior surfaces and the power cord

with a slighly damp cloth. Be sure to dry the ap-
pliance well before taking it back into use.

• For stainless steel surfaces, you can use appropri-

ate cleaning agents from a specialized dealer.

• Never use detergents, abrasive cleaners or sol-

vents. These can damage the appliance.

In the event of scale deposits:

• Before descaling, remove the pourer sieve 5

(see chapter "Removing/replacing the pourer
sieve").

• Obtain any decalcifying agent suitable for kitchen

utensils (e.g. decalcifiers for coffee machines)
from a hardware shop. Proceed as detailed in
the instructions provided for the use of the de-
calcfying agent.

Removing/replacing the pouring sieve

• Open the lid.
• Press the retainer at the top of the pourer sieve 5

down and, at the same time, pull the pourer sie-
ve 5 inwards.

• Remove the pourer sieve 5.
• Clean the pouring sieve 5 with a lightly

moistened dishcloth and under running water.

• Replace the pourer sieve 5 after cleaning it.

Ensure that the retainer engages and that the
pourer sieve 5 is firmly seated.

Notice

Should the scale deposits in the pourer sieve 5 be
firmly established, lay it in a water-vinegar solution
having a ratio of 6:1 for a few hours. The scale de-
posits will dissolve themselves. Rinse the pourer sie-
ve 5 with lots of clear water.

Storage

Allow the appliance to cool off completely before
putting it into storage.
• Wind the power cable around the cable retainer on

the underside of the base 3.

• Store the appliance in a dry place.

IB_86114_SWK3000EDSA1_LB4 23.11.2012 14:06 Uhr Seite 4

Advertising