Silvercrest SWEP 500 A1 - Manual (Page 121)

Set snooze time
• With the radio switched off, press the button MODE seven times.
The screen displays the snooze time set (default is SNO 10).
• Use the UP and DOWN buttons to set the snooze time to a time between
1 and 59 minutes.
Turning off the alarm function
• Press the Vol.+/AL–1 or Vol.–/AL–2 button until the relevant alarm symbols
disappear from the screen.
Stop watch function
The stop watch function is only available when the radio is switched off.
•
Press and hold down the PAGE button for around 2 seconds, the screen
shows 0.00 0 U.
• Press SNOOZE to start the stop watch. The maximum time for the stop watch
is 39 minutes and 59 seconds. If the stopwatch exceeds the maximum
time, the indicator 39:59.0 appears and flashes in the display.
• During time measurement, it can be stopped by pressing SNOOZE .
• Pressing SNOOZE again restarts the stop watch.
• Hold down SNOOZE to reset the stop watch.
• Leave the stop watch by pressing PAGE .
- 118 -
GB
IB_79840_SWEP500A1_LB2 04.01.2013 10:48 Uhr Seite 118