Silvercrest SED 3.7 B2 - Manual (Page 56)

53 SED 3.7 B2
GB
Protection class
II /
Polarity
Device
Input voltage 4.5 V
Power consumption 1000 mA
Safety instructions
RISK OF ELECTRIC SHOCK
► Connect the appliance only to correctly installed mains power
sockets supplying a current rating of 100 - 240 V ~ /
50/60 Hz.
► The power cable on this appliance cannot be replaced. In
the event of it being damaged the whole appliance must be
disposed of.
► In the event of operational malfunction, and for cleaning,
always remove the plug from the mains power socket.
► To disconnect the power cable, always pull the plug itself
from the mains power socket, do not pull on the cable.
► Do not kink or crimp the power cable and place it in such a
way as to prevent anyone from stepping on or tripping over it.
► Ensure that the power cable cannot become wet or moist
during operation. Place it such that it cannot be squashed or
damaged.
► To avoid risks, should the appliance be damaged discon-
tinue the use of it immediately.