Silvercrest SMP 6200 A1 - Manual (Page 12)

10 SMP 6200 A1
GB
IE
Always start the treatment at low speed and increase it only 5)
when needed. When you wish to increase the speed, press the
“Speed increase” 2 button. When you wish to decrease the
speed, press the “Speed decrease” 3 button.
You can now begin with the task. 6)
WARNING - RISK OF BURNS
Risk due to severe heat development!
While you are working, never let the attachments rest on one point.
Due to friction this leads to increased heat generation and may cause
injury.
Always work in a circular motion. ►
ATTENTION - PROPERTY DAMAGE
Risk due to overheating!
If you use the appliance for more than 15 minutes at a time, the motor
may overheat.
After 15 minutes of operation take an approx. 30 minute break so that ►
the motor can cool down.
Place the on/off /direction switch 7) 6 at “•” and remove the
power adapter 4 from the mains power socket when you have
fi nished the treatment.
NOTICE
If you have treated callouses, after completing the procedure apply a ►
moisturising cream to the treated areas.
IB_46740_SMP6200A1_GB6.indd 10 IB_46740_SMP6200A1_GB6.indd 10 06.12.2011 11:05:39 Uhr 06.12.2011 11:05:39 Uhr