Storage, Removing/replacing the pourer sieve – Silvercrest SWKCD 3000 A1 User Manual

Page 11

Advertising
background image

8

SWKCD 3000 A1

GB

In the event of scale deposits:

Scale deposits on the bottom of the appliance lead to increased energy con-
sumption and reduce the service life of the appliance.
Descale the appliance as soon as scale deposits become apparent.

■

Before descaling, remove the pourer sieve 6 (see chapter “Removing/
replacing the pourer sieve”).

■

Use a descaler designed for household appliances (e.g. for coff ee machines).
Proceed as detailed in the instructions provided for the use of the decalcifying
agent.

■

After descaling, rinse the appliance with lots of clean water.

Removing/replacing the pourer sieve

1) Open the lid.

2) Pull the pourer sieve 6 upwards out of its holder.

3) Clean the pourer sieve 6 with a lightly moistened dishcloth and under running

water.

4) After cleaning it, replace the pourer sieve 6. Ensure that the restraint

engage and that the pourer sieve 6 is fi rmly seated.

NOTICE

►

Should the scale deposits in the pourer sieve 6 be fi rmly established, lay
it in a water-vinegar solution having a ratio of 6:1 for a few hours. The
scale deposits will dissolve themselves. Rinse the pourer sieve 6 with lots
of clear water.

Storage

■

Allow the appliance to cool down completely before putting it into storage.

■

Wind the power cable around the cable winder 4 under the base 3.

■

Store the appliance at a dry location.

IB_89367_SWKCD3000A1_PL_BG.indb 8

IB_89367_SWKCD3000A1_PL_BG.indb 8

11.03.13 16:12

11.03.13 16:12

Advertising