2 displays, 3 modes of operation – Silvercrest SLE 420 A1 User Manual

Page 66

Advertising
background image

64 GB

Air outlet flap valve

Figure B: irrespective of which mode the
device is being operated in, open the top
flap valve 1. It clicks into place in four posi-
tions.
If the flap valve is not opened, the overheat-
ing protection will switch the device off after
a while for approx. 3 minutes.

7.2 Displays

The mode of operation LEDs 14 and the dis-
play 13 show the selected functions and the
humidity range.

Mode of operation LEDs

Display

7.3 Modes of operation

NOTE: the values selected for relative hu-
midity (RH%) are recognised with an up-
wards or downwards deviation of approx.
3%. This is necessary so that the device does
not constantly switch on and off.

• The device has 4 different modes avail-

able.

• By pressing the button 17 PRO-

GRAMM, you can switch between the
modes.

• The mode of operation LED 14 next to

the active mode illuminates.

LED illuminated

Meaning

WASSERTANK VOLL
(TANK FULL)

The water tank is
full or has not been
inserted.

TIMER AKTIV
(TIMER)

A switch-off time is
activated.

LUFTREINIGUNG
(AIR CLEAN)
WÄSCHETROCK-
NUNG
(DRY CLOTHES)
DAUERBETRIEB
(CONTINUOUS)
AUTOMATIK

Selected mode

BETRIEB
(OPERATION)

The device is
switched on.

Display

Meaning

This display can be seen
continuously during oper-
ation. It shows the humid-
ity range in the room:
NIEDRIG (LOW):
under 65%
MITTEL (MID):
65% to 75%
HOCH (HIGH):
over 75%

1 - 12
flash for 5 sec.

Timer for all modes:
These values (1 - 12 hours)
will flash for 5 seconds
when you use the arrow
keys to select a switch-off
time.

30 - 80 or CO
flash for 5 sec.

Set relative humidity in
continuous operation.
Values between 30 and
80 or CO will flash for
5seconds when
selected.
CO: The device dehu-
midifies continuously.

MITTEL
NIEDRIG

HOCH

MITTEL
NIEDRIG

HOCH

MITTEL
NIEDRIG

HOCH

GB_RP89301_Luftbefeuchter.fm Seite 64 Freitag, 19. April 2013 9:13 09

Advertising