Pressure Systems 9022 - Manual (Page 43)

Pressure Systems, Inc. NetScanner™ System (9016, 9021, & 9022) User’s Manual
www.PressureSystems.com 3 - 13
3.2 Detailed Command Description Reference
All commands applicable to the various models of the NetScanner ™ System Intelligent Pressure
Scanner modules are described on the following pages. They are summarized in the following
table. For convenience, this table is also repeated in Appendix B.
Table 3.2
Intelligent Pressure Scanner Commands
Type Command id Command Function
TCP/IP A Power-Up Clear
B Reset
C Configure/Control Multi-Point Calibration (4
sub-commands)
V Read Transducer Voltages
Z Calculate and Set Gains (Span Cal)
a Read Transducer Raw A/D Counts
b Acquire High Speed Data
c Define/Control Autonomous Host Streams (6
sub-commands)
h Calculate and Set Offsets (Re-zero Cal)
m Read Temperature A/D Counts
n Read Temperature Voltage
q Read Module Status
r Read High Precision Data
t Read Transducer Temperature
u Read Internal Coefficients
v Download Internal Coefficients
w Set/Do Operating Options/Functions
UDP/IP
Broadcast
psi9000 Query Network
psireboot Reboot Specified Module
psirarp Change Specified Module’s IP Address
Resolution Method (then Reboot)