Silvercrest SFB 10.1 C3 - Manual (Page 12)

SilverCrest SFB 10.1 C3
10 - English
1. Press this button while the menu of the selected device
is shown to return to the previous menu level or to quit
the menu. Exception: Pressing the
button
when using the “LEARN KEY” function returns to the
previous menu level.
2. Press this button while the remote control
“CONFIGURE” menu is shown to return to the
previous menu level or to quit the menu.
Executes a macro when used together with one of the
number buttons 1 to 6.
Mutes or restores the sound output (MUTE).
Confirms a menu item in the remote control
“CONFIGURE” menu or in the menu of the selected
device.
Menu navigation: move up
Menu navigation: move down
Menu navigation: move left
Menu navigation: move right
Increase/decrease volume
1. TV mode: Next / previous channel
2. CD/DVD mode: SKIP function
AV input selection for the selected device
Use this button to enter two-digit channel numbers. This
function depends on the selected device. To enter a two-
digit channel number, first press the
button and
then enter the channel number. Pressing the
button again allows you to enter a single-digit channel
number.
Toggles the remote control light on/off.
Configuration menus
Press and hold the button for 3 seconds to open the menu. The
default sub-menu is “LANGUAGE”. To program the remote control
according to your needs, use the
buttons to navigate to the
sub-menu you want or press to return to the start window. Press
the button to open the selected sub-menu.
If no entry is made for 30 seconds in setup mode, the
remote control returns to the start window. If necessary,
start programming again.