Silvercrest SNS 45 A3 - Manual (Page 23)

20 SNS 45 A3
GB
NOTICE
► Should any UV Gel a inadvertantly come onto the cuticle or the nail bed,
remove it before the hardening, for example, with a cotton wool swab.
♦ Repeat the above process for all nails.
e
i
NOTICE
► Ensure that the nail is covered evenly with UV Gel a.
Hardening of the UV-Gel
NOTICE
► See also the chapter Handling and operation.
♦ Switch the UV appliance 1 on with the ON/OFF switch 2.
♦ Press the Start button 0; the UV Lamps will be switched on.
♦ Now select the desired treatment time and then press the appropriate time
preselect button 9, 7 or 5. For the fi rst hardening we recommend the time
setting of 240 seconds.
♦ Hold your hand with the nails upward for the duration of the set treatment
time in the opening of the UV appliance 1.
♦ Treat the thumbnail separately because, when you hold your hand in the UV
unit, the UV light only shines on the side of it.
♦ Repeat the application of the UV gel a and the hardening in the UV appli-
ance 1 as described above once more.