Extreme Networks Summit1 - Manual (Page 142)

9-12 S UMMIT S WITCH I NSTALLATION AND U SER G UIDE
IP U NICAST R OUTING
disable bootp vlan [<name> | all] Disables the generation and processing of
BOOTP packets.
config iparp add proxy <ipaddress> {<mask>}
{<mac_address>} {always} Configures proxy ARP entries. Up to 64
proxy ARP entries can be configured.
When <
mask > is not specified, a how
address with the mask 255.255.255.255 is
assumed. When <
mac_address > is not
specified, the MAC address of the switch
is used in the ARP Response. When
always is specified, the switch answers
ARP Requests without filtering requests
that belong to the same subnet of the
receiving router interface.
config iparp delete proxy [<ipaddress> {<mask>} |
all] Deletes one or all proxy ARP entries.
disable bootprelay Disables the forwarding of BOOTP
requests.
disable ipforwarding {vlan <name> | all} Disables routing for one or more VLANs.
disable ipforwarding broadcast {vlan <name> | all} Disables routing of broadcasts to other
networks.
disable multinetting Disables IP multinetting on the switch.
clear iparp [<ipaddress> <mask> | vlan <name> |
all] Removes dynamic entries in the IP ARP
table. Permanent IP ARP entries are not
affected.
clear ipfdb [<ipaddress> | vlan <name> | all] Removes the dynamic entries in the IP
forwarding database.
Table 9-1: Basic IP Commands (continued)
Command Description
Summit.bk : 9ROUT.FM Page 12 Thursday, June 18, 1998 9:27 AM