Epson 4500 - Manual (Page 230)

Options
Problem Solution
Using the cut sheet
feeder, the paper does
not feed properly
(continued).
One page of printing
has spread to two
pages.
Using the pull tractor
with the push tractor,
continuous paper does
not feed properly.
The FORM FEED or
LINE FEED
button was
pressed, but the
paper
does not feed at all.
(Platen does not
rotate.)
The page length setting may be wrong.
Run a self test in cut sheet feeder mode.
The printer will automatically measure the
paper loaded and set the correct page
length. See Chapter 5.
You may have to change the top or bottom
margin or page length for your application
program.
The printer may be on line. Before using
the control panel buttons to feed paper,
always put the printer off line
(ON LINE
light out).
7-28 Troubleshooting