Silvercrest STV 45 C2 - Manual (Page 39)

STV 45 C2 37
3. Technical data
Power supply: 220 - 240 V
~
/ 50/60 Hz
Maximum power: 45 watts
Protection class: I I
4. Safety instructions
4.1 Terms used
The following signalling terms are found in
these Operating Instructions:
Warning!
High risk. Disregarding the
warning may cause injury to life
and limb.
Caution!
Medium risk. Disregarding the warning may
cause damage to property.
Note:
Low risk. Circumstances that should be taken
into account when dealing with this
appliance.
4.2 General information
• Before using the appliance, be sure to
read these Operating Instructions
carefully. They are a component part of
the appliance and must be available at
all times.
• Use the appliance only for the purpose
described (see “1.1 Intended purpose”
on page 36).
• Check whether the mains voltage (see
type plate on the appliance) agrees with
your mains voltage.
• This device is not intended to be used by
individuals (including children) with
limited physical, sensory or mental
capabilities or with a lack of experience
and/or lack of knowledge, unless
supervised by a person responsible for
their safety or they have received
instructions from such a person as to
how to use the device. Children should
always be supervised to ensure that they
do not play with the device.
• If there should be any malfunctions, the
appliance may only be repaired by our
Service Centre. The contact data can be
found in “Service Centre” on page 43.
Description Symbol Value Unit
Maximum fan flow rate F 16,98 m 3
/min
Fan power input P 38,9 W
Service value SV 0,44
(m
3
/min)/W
Standby power consumption Psb 0 W
Fan sound power level Lwa 55 dB(A)
Maximum air velocity c 2,17 m/s
Measurement standard for service value IEC 60879:1986+(corr.1992)
RP96066 Tower-Ventilator LB1 Seite 37 Donnerstag, 10. Oktober 2013 10:45 10