Elmo Ceiling Presenter HV-C1000XG - Manual (Page 15)

11
14
1
2
3
4
5
6
7
8
9
10
4
INSTALLATION
Setting of Auto Focus Operating Range
The following settings of this product can be changed with the DIP Switches. Change the
settings according to the connection environment. The factory settings are as shown in the
following table:
In delivery from plant, the whole area is set.
When changing the DIP Switch keys, be sure to turn OFF the power supply to this poduct
beforehand.
AF operating range (Shooting distance)
Whole area (1.3m )
1.3m 1.8m
1.7m 2.8m
2.7m
[C] key [D] key
0 0
1 0
0 1
1 1
Installation of the Unit
For the ceiling mounting metal piece, VB-1000
separately available, any product approved by UL
Standard for projector which is capable of supporting
a load of 8-10 kg or more, or similar product also
approved by UL Standard shall be used. Request your
distributor to install this product on the ceiling. For
details, refer to the HV-C1000XG Installation Manual
included in the package.
Connect the power supply cord with the Power Cord
Receptacle of this product and plug outlet.
Turn ON the Power Supply Switch.
When this product is not used for a long time, turn
OFF the Power Supply Switch or remove the power
supply plug from the outlet.
Provide a distance of 1.3m or more between the
unit and the document to be projected.Images can
be focused when the distance increases; however,
the light intensity may be insufficient.If the distance
is more than 3m, external lighting is needed.