Extreme Networks Summit 300-48 - Manual (Page 17)

Summit 300-48 Switch Software User Guide 17
1
ExtremeWare Overview
This chapter describes the following topics:
• Summary of Features on page 17
• Security Licensing on page 20
• Software Factory Defaults on page 20
ExtremeWare is the full-featured software operating system that is designed to run on the
Summit 300-48 switch. This section describes the supported ExtremeWare features for the Summit
300-48 switch.
Summary of Features
The Summit 300-48 switch supports the following ExtremeWare features:
• Unified Access support
• Virtual local area networks (VLANs) including support for IEEE 802.1Q and IEEE 802.1p
• Spanning Tree Protocol (STP) (IEEE 802.1D)
• Quality of Service (QoS) including support for IEEE 802.1p, MAC QoS, and four hardware queues
• Wire-speed Internet Protocol (IP) forwarding
• Extreme Standby Router Protocol (ESRP) - Aware support
• Diffserv support
• Access-policy support for routing protocols
• Access list support for packet filtering
• Access list support for rate-limiting
• Load sharing on multiple ports
• RADIUS client
• Console command-line interface (CLI) connection
• Telnet CLI connection