First use, Attachment fi tting / removal, Fitting attachments – Silvercrest SWCD 1000 B1 User Manual
Page 53: Removing attachments
50
SWCD 1000 B1
GB
First use
■
Before taking the appliance into use ensure that ...
–
the appliance and the attachments are in good working order,
–
all packaging materials have been removed.
■
Clean all of the attachments as described under “Cleaning and care”.
Attachment fi tting / removal
WARNING! RISK OF INJURY!
►
After operation, the appliance components may be hot!
Fitting Attachments
■
Insert the desired attachment into the attachment insertion slot 1, so that
the front arrow symbol on the attachment points at the arrow symbol on the
attachment insertion slot 1
.
■
Turn the attachment clockwise until it clicks into place. The back arrow on the
attachment now points at the arrow on the attachment insertion slot 1
.
Removing attachments
■
First switch the appliance off and allow it to cool down..
■
Press the release button “push” 7 and turn the attachment anti-clockwise
.
■
The attachment can now be removed by pulling it out of the attachment inser-
tion slot 1.