Safety instructions, Risk of electric shock – Silvercrest EDS - SSM 600 D2 User Manual

Page 48

Advertising
background image

45

GB

EDS-SSM 600 D2

Safety instructions

RISK OF ELECTRIC SHOCK

►

Connect the appliance only to mains power sockets supplying a
mains power voltage of 220 - 240 V ~ / 50 Hz.

►

In event of operating malfunctions and before cleaning the
appliance, remove the plug from the mains power socket.

►

Do not expose the appliance to moisture and do not use it out-
doors.

►

If liquid gets into the housing, disconnect the appliance from the
mains power socket immediately and have it repaired by a quali-
fi ed technician.

►

Always pull on the plug to disconnect the appliance from the mains;
never pull on the power cable itself.

►

Do not kink or crush the power cable, and route the cable so that
it cannot be stepped on or tripped over.

►

To avoid risks, arrange for defective plugs and/or power cables
to be replaced at once by qualifi ed technicians or our Customer
Service Department.

►

Do not attempt to open the hand blender’s motor casing. If you
do so, the safety of the appliance is no longer assured and the
warranty will become void.

►

This appliance may be used by people with reduced physical,
sensory or mental capabilities or lack of experience and/or
knowledge if they are supervised and have been instructed
in how to use the appliance safely and have understood the
potential risks.

►

The appliance and its connecting cable must be kept away from
children.

Never immerse the motor unit in liquids, or allow liquids to get
into the motor unit housing.

IB_100105_EDS-SSM600D2_LB1.indb 45

15.04.14 16:20

Advertising