Cleaning and care – Silvercrest SSK 300 A1 User Manual

Page 39

Advertising
background image

38

SSK 300 A1

GB
MT

9) To interrupt the cooking process, press the

HERVIR/VAPOR button q or the ENC/APAG
button e.

10) Remove the lid 2 carefully.
11) Remove the egg insert 7 from the blender

jug 3.

Heat-up

You can also reheat soups that you have made
earlier with the appliance.

NOTE

►

Before using the CALENTAR function, the
blender jug 3 must be cleaned thoroughly.
Ensure that no food residue remains at the
bottom of the appliance.

1) Insert the plug into a mains power socket.

The appliance emits an acoustic signal.

2) Pour in the soup to be heated up.
3) Press the ENC/APAG button e. The appliance

emits an acoustic signal. All control lamps fl ash.

4) Press theENC/APAG button r. Two signal

tones will confi rm your selection and the cor-
responding signal lamp will fl ash.

The heating of the soup now takes place automatic-
ally: The appliance heats and mixes alternately.
As soon as the heating process is complete, the
appliance will stop automatically.

NOTE

►

You can stop the heating process at any time
by pressing the ENC/APAG button e or the
CALENTAR button r. The control lamp then
goes off and the appliance switches itself off .

Cleaning and care

It is best to clean the appliance as soon as it has
cooled down after each use. Dried-on food residue
is more diffi cult to remove.

Cleaning the blender jug

DANGER – ELECTRIC SHOCK!

►

Ensure that no liquids come into contact with
the electrical connector on the blender jug 3!

NEVER immerse the blender jug 3 in
water or other liquids! Otherwise there
is a risk of an electric shock.

WARNING! RISK OF INJURY!

►

Take care when cleaning the blender jug 3.
The blade 4 is very sharp!

1) Insert the plug into a mains power socket.

The appliance emits an acoustic signal.

2) Add a little warm water and a drop of

washing up liquid to the blender jug 3.

3) Close the lid 2.
4) Press the ENC/APAG button e.
5) Press the PULSAR button t and allow the

appliance to run for about 1 minute.

6) Remove the plug from the mains power socket.
7) Remove stubborn remains using the cleaning

brush 8 or the cleaning sponge 0. The narrow
side of the cleaning brush 8 is particularly
well-suited to removing food residue from the
bottom of the appliance.

8) Afterwards, empty the container and rinse it

out thoroughly with clear water.

Advertising