Eagle Electronics 642c iGPS - Manual (Page 66)

60
Route Planning command on Main Menu (left). Routes menu (center).
Edit Route menu (right) with Navigate Route command selected.
2. Press
↓ to select saved route name|
ENT . Highlight N
AVIGATE
and press
ENT .
3. Upon arrival at your destination, cancel navigation.
Press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT |
← to
Y ES
| ENT .
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In
Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been trig-
gered and the bearing arrow on the compass rose has turned to point
toward Wpt 2, off to the northeast.
Figure 2. Figure 1.