Epson 5600p - Manual (Page 76)

70 Solving Problems
The message Not Supported is displayed.
■ If you’ve connected a second computer or you’re using
component video, make sure the
BNC option in the Setting menu
is correct. See page 54.
■ Make sure your computer’s resolution doesn’t exceed UXGA
(1600
× 1200), and the frequency is supported by the projector
(see page 97). If necessary, change your computer’s resolution
setting as described below.
Only part of the computer image is displayed.
■ Press the Resize button on the control panel or remote control.
■ Make sure the image Position setting is correct on the Video
menu. See page 46 for more information.
■ If you’ve connected a second computer, make sure the BNC
option in the Setting menu is set to RGB . See page 54.
■ Make sure your computer’s resolution setting is correct. Ideally, it
should be 1024
× 768 (for the PowerLite 7600p) or 800 × 600
(for the PowerLite 5600p) to match the projector’s native
resolution. If this option isn’t available, select one of the other
compatible video formats listed on page 97.
■ Windows:
Right-click the desktop, select
Properties , click the Settings
tab, and use the dialog box to select a different resolution.
■ Macintosh:
On the Apple menu, choose
Control Panels , then click
Monitors and Sound . Select a different resolution.
■ You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
5600 and 7600.book Page 70 Thursday, December 14, 2000 2:46 PM