Edirol V-8 - Manual (Page 97)

97
Input/output
settings
Intr
oduction
Connections
Basic operation
Switc
hing ima
g
e
s
Eff
ects
BPM sync
External de
vices
Video fader
Appendices
MIDI Implementation (continued)
● Input Select A Assign
This controls the bus A INPUT SELECT buttons.
The factory default setting is CC00 + CC32 + PC.
● Input Select B Assign
This controls the bus B INPUT SELECT buttons.
The factory default setting is CC00 + CC32 + PC.
● Effect-A1 Assign
This specifies the [1 (FEEDBACK)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Effect-A2 Assign
This specifies the [2 (NEGATIVE)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Effect-A3 Assign
This specifies the [3 (COLORIZE)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Effect-A4 Assign
This specifies the [4 (MULTI)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Effect-B1 Assign
This specifies the [1 (FLIP)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Effect-B2 Assign
This specifies the [2 (CHROMA KEY)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Effect-B3 Assign
This specifies the [3 (LUMINANCE KEY)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Effect-B4 Assign
This specifies the [4 (P in P)] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Fade A Switch Assign
This specifies the bus A [FADE] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Fade B Switch Assign
This specifies the bus B [FADE] button on/off and the parameter.
With the factory settings this is unassigned.
Values are 0, 1–127, corresponding to Off, On: 0–Max.
● Control A Assign
This specifies the bus A [CONTROL] fader output.
With the factory settings this is unassigned.
Values are 0–127, corresponding to 0–Max.
* Transmit only.
● Control B Assign
This specifies the bus B [CONTROL] fader output.
With the factory settings this is unassigned.
Values are 0–127, corresponding to 0–Max.
* Transmit only.
● Video Fader Assign
Controls the VIDEO FADER.
The factory default setting is CC11.
Values are 0-127, corresponding to bus A–bus B.
● Transition Assign
This selects the TRANSITION buttons.
With the factory settings this is unassigned.
Values are 0–2, corresponding to the [1 MIX
], [ 2 WIPE ], and [ 3 EFX ] button .
● Transformer A Assign
This specifies the bus A [RANSFORMER] button on/off.
With the factory settings this is unassigned.
Values are 0–63 and 64–127, corresponding to OFF and ON.
● Transformer B Assign
This specifies the bus B [RANSFORMER] button on/off.
With the factory settings this is unassigned.
Values are 0-63 and 64-127, corresponding to OFF and ON.
● BPM SYNC Assign
Switches BPM SYNC on/off.
With the factory settings this is unassigned.
Values are 0-63 and 64-127, corresponding to OFF and ON.
● Transition Time Assign
This specifies image switching time.
The factory default setting is CC07 (Volume).
Values are 0–127, corresponding to 0.0 sec–4.0 sec.
● BPM/CONTROL Assign
Controls the [BPM/CONTROL] knob.
The factory default setting is OFF.
* Transmit only.
● Output Fade Assign
Controls the [OUTPUT FADE] fader.
The factory default setting is OFF.
Values are 0–127, corresponding to fade 0%–100%.
● White/Black Assign
Controls the [WHITE/BLACK] switch.
The factory default setting is OFF.
Values are 0–63 and 64–127, corresponding to BLACK and WHITE.
● PC Input Select Assign
Controls the [PC INPUT SELECT] switch.
The factory default setting is OFF.
Values are 0 and 1, corresponding to PC1 and PC2.
● Preview Output Assign
Controls the PREVIEW OUTPUT SELECT buttons.
The factory default setting is OFF.
Values are 0–1, corresponding to the PREVIEW OUTPUT SELECT [1]–
[OUTPUT] buttons.
● Memory Assign
Controls the [MEMORY] knob.
The factory default setting is CC00 + CC32 + PC.
Values are 0–7, corresponding to memory number 1–8.
■ Factory Setting of V-LINK
The factory setting of V-LINK (receipt of V-LINK ON message only) is as
follows.
* When V-LINK is off, V-LINK message will be ignored.
* The changes of setting done while V-LINK is on will not be saved.
* When switching from V-LINK ON to OFF, the MIDI transmit/receive settings
revert to the settings that were in effect before V-LINK was switched on.
Parameter Assign Value
Rx Channel - 1
Tx Channel - 1
Note Mode - OFF
Input Select A Assign CC00 + CC32 + PC Bus A: 1
Input Select B Assign CC00 + CC32 + PC Bus B: 2
Effect-A1 Assign OFF OFF
Effect-A2 Assign OFF OFF
Effect-A3 Assign OFF OFF
Effect-A4 Assign OFF OFF
Effect-B1 Assign OFF OFF
Effect-B2 Assign OFF OFF
Effect-B3 Assign OFF OFF
Effect-B4 Assign OFF OFF
FADE A Switch Assign OFF OFF
FADE B Switch Assign OFF OFF
Control A Assign OFF OFF
Control B Assign OFF OFF
Video Fader Assign CC11 (Expression) Bus A 100%
Transition Assign OFF 1
Transformer A Assign OFF OFF
Transformer B Assign OFF OFF
BPM/Sync Assign OFF OFF
Transition Time Assign CC05 (Portamento Time) 0.0sec
BPM CONTROL Assign OFF OFF
Output Fade Assign OFF MAX
White/Black Assign OFF Black
PC Input Select Assign OFF OFF
Preview Output Assign OFF OFF
Memory Assign CC00 + CC32 + PC 1
V-8_e.book 97 ページ ２０１０年４月１６日 金曜日 午後５時１４分