Epson PowerLite 1715c - Manual (Page 75)

Presenting Through a Wireless Network 75
6. If you set up the projector to prompt you for a keyword before
connecting, you see a screen like this one:
Type in the four-digit number displayed on the EasyMP Network
screen and click
OK .
7. Once the connection is established, you see your computer’s
image transmitted to the screen, and a floating control bar on
your computer desktop:
8. If necessary, you can drag the control bar out of the way on your
screen.
9. When you’re done with your presentation, click Disconnect on
the control bar.
Solving Connection Problems
If you don’t see your projector, check the following:
1. Make sure your wireless signal is strong enough to establish a
connection. If you have a Mac, check the AirPort icon on the Mac
menu bar. For Windows, see the documentation for your access
point or wireless network card or adapter.
Enter keyword
Windows
Macintosh
note
If none of these suggestions
work, see the troubleshooting
information beginning on
page 163.