Epson PowerLite 1715c - Manual (Page 147)

Maintaining the Projector 147
Cleaning the Air Filter and Vent
Clean the air filter and air intake vent after every 100 hours of use. If
they are not cleaned periodically, they can become clogged with dust,
preventing proper ventilation. This can cause overheating and damage
the projector.
Follow these steps:
1. Turn off the projector. Wait for the Power light to stop flashing,
then unplug the power cord.
2. Turn the projector upside down.
3. To clean the intake vent and filter, use a small vacuum cleaner
designed for computers and other office equipment. If you don’t
have one, gently clean the vent with a soft brush (such as an
artist’s paintbrush).
4. If the dirt is difficult to remove or the filter is broken, replace the
filter as described on page 150. Contact your dealer or call Epson
at 800-GO-EPSON (800-463-7766) to obtain a new filter.
note
To order replacement air
filters, request part number
V13H13408. See page 13
for ordering information.