Epson PowerLite 1715c - Manual (Page 44)

44 Connecting to Computers, Cameras, and Other Equipment
Connecting to a Digital Camera or
Other Device
You can connect your digital camera, USB flash memory drive, USB
hard drive, or multimedia storage viewer, such as the Epson P-4000 or
iPod
® photo. Use the USB cable specified for your device. Then you
can use your device’s slideshow function or the projector’s EasyMP
PC Free feature (see page 93) to present images.
1. Connect the flat end of the USB cable to the flat USB port
on the projector, as shown.
2. Connect the other end of the cable to your camera or other
device.
Removing the USB Cable
If you’re using PC Free mode to project your images, exit PC Free
mode before you remove the USB cable from the projector.
1. Position the cursor over the Exit button in the upper right corner
of the PC Free screen.
2. Press the Enter button on the remote control to close PC Free
mode.
3. Disconnect the USB cable.
note
Use a cable less than 10 feet
long and connect the camera
directly to the projector.
Your projector may not
function correctly if you use
a longer cable or connect
your camera to a USB hub.
If you connect a USB hard
drive, make sure you use the
AC adapter to power the
hard drive.
The slideshow function on
some devices may not work
with the USB connection.