Powerfix PEK 2.4 B1 - Manual (Page 11)

PowerFix PEK 2.4 B1
English - 9
Inserting / replacing the batteries
Ensure that the camera is switched off. The battery compartment [9] is located
to the left below the screen.
Remove the battery compartment cover by
pushing it downwards.
Carefully pull the battery holder out of the
device.
Insert the batteries into the battery holder,
ensuring correct polarity - refer to the diagrams
in the holder.
Push the battery holder into the battery
compartment as shown in the illustration.
Please note: The holder can only be pushed in
one direction.
Close the battery compartment with the cover.