Powerfix PMT 1.1 A1 - Manual (Page 32)

29 PMT 1.1 A1
GB
MT
♦ To lower the furniture piece onto the roller base 3 slowly lift the lever
arm (D).
D
♦ Remove the lever arm .
♦ Repeat the above procedure for the opposite side of the furniture piece.
Shunting furniture
♦ Adjust the roller bases 3 so that the wheels all face in the same direction.
♦ Pull/push the furniture piece to the desired location with the assistance of
the roller bases
3 .
Removing the roller bases
NOTICE
► To avoid uneven lifting, always take into account the load centre of gravity
and place the lever arm
on the side to be lifted.
► Hold the lever arm at the hand grip 2 . With this you will require the
least eff ort.
♦ Push the swivelling head 4 of the lever arm under the furniture and in
the middle of it.
♦ To lift the furniture, slowly press the lever arm down.
♦ Hold the lever arm pressed down.
♦ Remove the roller bases 3 .
♦ To lower the furniture piece, slowly lift the lever arm .
♦ Remove the lever arm .
♦ Repeat the above procedure for the opposite side of the furniture piece.
IB_76607_PMT1.1A1_LB5.indb 29 IB_76607_PMT1.1A1_LB5.indb 29 30.08.12 15:21 30.08.12 15:21