Epson 60 User Manual
Page 66
USING SELECTYPE MODE TO ADJUST THE HP EMULATION MODE
ORIENT (Page Orientation)
This feature allows you to select the direction in which characters are printed on the
page.
Available Options: PORT (portrait; vertical), LAND ( landscape; horizontal), R-PORT
(opposite direction of portrait), R-LAND (opposite direction of landscape)
1. Enter Level 1 mode (see page 26).
2. Press
or
until ORIENT. is displayed.
3. To change the current setting:
4. Press
or
until the required setting is dis -
played.
5. Store the displayed setting:
6.
twice to return to printer "Ready" mode.
FONT
Use this feature to select the source of your font, and the font itself.
1. Enter Level 1 mode (see page 26).
2. Press
or
until FONT is displayed.
3.
4. If you have installed an optional font car -
tridge, press
or
to select the required
font source.
❐ RD is for the resident fonts. If you have in -
stalled an optional font card or cartridge,
you will also have the choice of A (for the
fonts on the font card), C (for the fonts on
the cartridge), or DL (for downloaded
fonts) . See Appendix D for more on the
use of optional font kits.
APPENDIX B. HP EMULATION MODE
B-5