Epson 550 - Manual (Page 22)

22
Setting Up the Projector
Turning Off the Projector
1. Turn off any equipment connected to the projector.
2. Press the Off button on the remote control, or press the Power button on the projector
twice.
3. Let the projector cool down for about 30 seconds.
4. When the Ppower light stops flashing and stays on, turn off the projector’s power switch
on the back.
It is now safe to unplug the projector, if necessary.
Caution: Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce the
overall life of the product. Never unplug the projector without turning it off and letting it cool as
described above, or you could damage it and reduce lamp life.
Selecting the Image Source
The Source buttons on the projector and remote control let you switch between images from
different pieces of equipment connected to the projector (such as a DVD player, cable or
satellite box, or video game console).
Press the Source button on the remote control that corresponds to the port to which your
video source is connected.
Source buttons