Epson EPL-N7000 - Manual (Page 148)

Using the PostScript Printer Driver (Windows) 137
4
4
4
4
4
4
4
4
4
4
4
4
3. Specify the desired Reserve Job settings in the dialog box that
appears.
4. When printing multiple copies, select the Collated check box
in the Advanced settings of the printer driver.
5. When you are done with the settings, click the Print button to
print.
Note:
See “Using the Reserve Job Function” on page 65 for details on the
individual settings in the Job Settings sheet.
Using AppleTalk under Windows 2000 or
Windows NT 4.0
Use the following settings if your machine is running Windows
NT 4.0 or Windows 2000, and the printer is connected through an
network interface using the AppleTalk protocol:
❏ Use SelecType to set the Emulation Mode-Network item to
PS3. Using the default Auto setting will cause an extra,
unneeded page to be printed.
❏ On the Device Settings sheet of the printer’s Properties dialog
box, make sure that SEND CTRL-D Before Each Job and
SEND CTRL-D After Each Job are set to No.
❏ TBCP (Tagged binary communications protocol) cannot be
used as the Output Protocol setting.