Connecting the smoke outlet pipe – MCZ Philo User Manual
Page 20
PELLET STOVES
Chapter 3
USE AND MAINTENANCE MANUAL
page
20
Installation and assembly
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
3.3. CONNECTING THE SMOKE OUTLET PIPE
The smoke outlet can be positioned either at the rear or at the top of
the stove.
Should you wish to connect the smoke outlet at the top of the
stove, remove the cap with the three screws from underneath the top.
Next, insert the pipe until it joins the smoke connection.
If the smoke outlet is positioned at the rear of the stove
the T-union must be turned towards the back of the stove and
the pre-perforated panel at the rear of the stove must be
removed.
Next, connect the pipes.
Remove the fixed cap with the three
screws from underneath the top of the
stove.
Inserting the upper smoke outlet pipe.