MCZ Toba HYDRO 22 - Manual (Page 43)

43
R
P
18 - MAINTENANCE AND CLEANING
Technical Dept. - All rights reserved - Reproduction is prohibited
At this point, using a rod or a brush for cleaning bottles, clean inside the pipe unit and the pipes, removing any ash deposits.
Check the gasket of cover “G” and replace it if necessary (see figure on the previous page).
CAUTION: the exchanger must be cleaned at the end of the season by an authorised and qualified technician so that
any worn seals may be replaced.
After cleaning the tube bundle open door “R”, extract the ash pan and empty it of any ash that has dropped while cleaning.
Clean the turbulators and return all the pieces to their seats.