Medal Sports 14807 GI - Manual (Page 8)

7
FIG. 3
Underside
the table
FIG.3D
FIG.3A
15
14
FIG.3C
18
17
FIG.3
8. Thread the wire from Goal Box (#13) through the openings of the end aprons and support of the playfield to the
opening of side apron. See FIG.3A.
9. Attach the Goals (#13) to each End Apron using three Screws (#11). See FIG.3.
10. Attach the Electronic Scorer (#6) to the side apron in the pre-drilled holes using two Screws (#12). Insert the
Scorer Wire into the Electronic Scorer (#6). See FIG.3 & 3B.
11. Tear off the backside paper of the Felt Pad (#18) and stick them at the bottom of the Pushers (#17). See
FIG.3C.
12. Insert the Adaptor (#15) into the DC Jack. See FIG.3D.
FIG. 3B
11
12
6
13
13