Medal Sports SH39600 - Manual (Page 5)

4
FIG.1
ASSEMBLY INSTRUCTIONS
3. Attach the Lower Side Aprons (#5) and Lower End Aprons (#4) to the Main Cabinet (#1) using eight Screws (#13).
See FIG.1.
FIG. 1
4
5
1
13
13
5
4
36
1. Find a clean, level place to begin the assembly of your Billiard Table. The table will be assembled upside down
and then turned over on its legs once the assembly completed. This game table is heavy, and turning it over will
require at least four strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list.
Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
41
Pre-installed
8 x 55mm Bolt
12 Pieces