Mirage OMD-28 - Manual (Page 12)

om design series manual
4 . 0 c o n n e c t i n g y o u r s p e a k e r s
10
BI-WIRE METHOD
This method involves using multiple cables and
connectors, to access two sets of terminals on the OM
Design loudspeakers simultaneously. The benefit of
bi-wiring is to reduce noise, as you will have twice the
thickness of cable between the amp and speakers as
the traditional method would provide. For more
details on the benefits of bi-wiring, please discuss this
with your authorized MIRAGE
® retailer.
OMD-R AND OMD-C2
Before starting, remove the gold “shorting straps”,
which connect the top and bottom set of input
terminals. To remove the straps, loosen all of the
connectors and pull the straps away from the binding
posts. Make sure you put them in a safe place for
future use.
Then simply connect two separate set of wires to the
four binding posts.