Electrolux 88810 - Manual (Page 10)

10
Prior to using for the first time
Switching on the appliance for the first time - setting
the language
The display is set to English as standard in the factory.
3
Important: If the display does not show the menu for setting the lan-
guage when the appliance is switched on, the appliance has been
switched on before. If this happens, please see the section “Setup/Lan-
guage”.
To switch on the appliance, turn the program knob to any program,
e. g. COTTON.
The display lights up and
should look like the illustra-
tion opposite.
In addition the display
shows:
– “To confirm push OK key”
– “To change push OPTION
key”
If you want to keep the language:
Press the OK key.
If you want to change the
language:
1. Press the OPTION key repeat-
edly, until the desired lan-
guage appears in the display,
e. g. DEUTSCH.
2. Press the OK key.
In the display DEUTSCH
flashes several times and the
display should then look like
e.g. the illustration opposite.
3. To switch the appliance off,
turn the programme knob
to OFF.
L a n g u a g e :
E N G L I S H
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. RPM OPTIONS OK TIME
S p r a c h e
D E U T S C H
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. RPM OPTIONS OK TIME
K O C H W Ä S C H E
12.45
P r o g r a m m e n d e u m
15.05
95C1800 aýýýýýaýaýaýaýaýaýaýaýa
TEMP. RPM OPTIONS OK TIME