Epson Artisan 1430 - Manual (Page 4)

Printing problems
• Make sure the paper size selected in the printer software
matches the size of paper you loaded.
• Printing stops when an ink cartridge is expended. If a
cartridge is expended, you must replace it to continue
printing.
Paper feeding problems
If paper doesn’t feed correctly, remove the paper and fan the
sheets, then reload them. Don’t load paper above the tabs on
the edge guides.
Print quality problems
• Make sure your paper is loaded printable side up (usually the
whiter, brighter, or glossy side).
• For the best print quality, use Epson papers and genuine
Epson ink cartridges.
• Make sure the paper type selected in the printer software
matches the paper you loaded. See the online User’s Guide
for more information.
• If you notice light or dark bands across your printouts or
they are too faint, run a nozzle check to see if the print
head needs cleaning. See the online User’s Guide for more
information.
• If you notice jagged vertical lines, you may need to align the
print head. See the online User’s Guide for more information.
• The ink cartridges may be low on ink. Check your cartridge
levels and replace cartridges, if necessary. See the online
User’s Guide for more information.
Error indicators
If you see one of the error indicators below, follow the steps
here to proceed:
On Off Flashing slowly Flashing fast
Paper is out, the CD/DVD tray is not inserted correctly
(if printing on a CD or DVD), or multiple sheets have
fed at the same time. Load paper or the CD/DVD tray
correctly and press the
paper button.
Paper is jammed in the printer, the output tray is closed,
or the CD/DVD tray did not eject (if printing on a CD or
DVD). Remove any jammed paper and make sure the
output tray is open, then press the
paper button to
resume printing. If printing on a CD or DVD, pull out the
CD/DVD tray and press the
paper button.
An ink cartridge is not installed, installed incorrectly,
expended, or cannot be used with the printer. Make sure
all ink cartridges are installed correctly and replace any
expended or incompatible ink cartridges.
An ink cartridge is nearly expended. You can continue to
use it until it is expended.
The print head is obstructed by jammed paper or
another foreign object and cannot return to the home
position. Turn the printer off. Open the printer cover and
remove any paper or other obstructions from the paper
path. Then turn the printer back on. If the error does not
clear, contact Epson.
Flashing
alternately
The printer’s ink pads are nearing or at the end of their
service life. Contact Epson to replace the ink pads. If the
ink pads are nearing the end of their service life, printing
can be resumed by pressing the
paper button.
A firmware update did not complete and the printer is
in recovery mode. Try updating the firmware again or
contact Epson.
Need paper and ink?
Try Epson premium papers with Claria ® ink for better than
photo lab quality results. For the right supplies at the right
time, you can purchase them at Epson Supplies Central
at www.epson.com/ink3 (U.S. sales) or www.epson.ca
(Canadian sales). You can also purchase supplies from an
Epson Authorized reseller. To fi nd the nearest one, call
800-GO-EPSON (800-463-7766).
Genuine Epson paper
Epson offers a wide variety of papers to meet your needs;
visit Epson Supplies Central for more information.
Premium Photo Paper Semi-gloss
Instant-drying, soft gloss paper for brilliant,
fi ngerprint-resistant photos. Ideal for framing,
albums, or sharing.
Genuine Epson inks
Look for the numbers below
to fi nd your cartridges. It’s as
easy as remembering your number!
Artisan 1430 ink cartridges
Color High-capacity
Black 79
Cyan 79
Magenta 79
Yellow 79
Light Magenta 79
Light Cyan 79
Epson Connect
Get instant, wireless printing of photos and
attachments right from smartphones, iPads,
tablets, and other popular mobile devices.
See www.epson.com/connect for details.
Epson, Artisan, Claria, and Supplies Central are registered trademarks and Epson Exceed
Your Vision is a registered logomark of Seiko Epson Corporation. Designed for Excellence is
a trademark of Epson America, Inc.
General Notice: Other product names used herein are for identifi cation purposes only and
may be trademarks of their respective owners. Epson disclaims any and all rights in those
marks.
This information is subject to change without notice.
© 2011 Epson America, Inc. 10/11 CPD-35556
Printed in XXXXXX
Connection options
Wireless connection
You must install the software on every computer from which
you want to print. The installer may prompt you to connect
the printer to your computer with a USB cable temporarily.
After the printer is connected to the network, you will be
prompted to remove the cable. (USB cable not included.)
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don’t have this information, contact the person who set
up your network.
Note: If you connect to your network using Wi-Fi Protected Setup
(WPS) on Windows, you do not need to know your SSID and network
password.
Direct USB connection
Make sure you have a USB cable.
Any problems?
Network setup was unsuccessful.
• If you’re connecting the printer via Wi-Fi Protected Setup
(WPS), make sure you press and hold the Wi-Fi button on
the printer within 2 minutes of pressing the WPS button on
your router. Press and hold the Wi-Fi button on the printer
for 3 seconds.
• Try connecting to the router or access point with your
computer or another device to confi rm that it is working
correctly.
• Try resetting the router (turn it off and then on), then try to
connect to it again.
• Press the button to print a network status sheet. Verify
that the network settings are correct and check the signal
strength. If it’s poor, try moving the printer closer to your
router or access point. Avoid placing the printer next to a
microwave oven, 2.4 GHz cordless phone, or large metal
objects such as a fi ling cabinet.
• If your router or access point doesn’t broadcast its network
name (SSID), manually enter the name. If your router or
access point has wireless security enabled, you’ll also
need to know what kind of security it’s using and make
sure you enter the WEP key or WPA passphrase correctly.
• When using TCP/IP, make sure your network’s DHCP
option is enabled (your router manufacturer will be able to
assist you with this setting).
• Disable the fi rewall temporarily to see if that may be
causing the problem. Contact your fi rewall manufacturer
for assistance.
Setup is unable to find my printer after connecting it
with a USB cable.
Make sure it is securely connected as shown:
Any questions?
On-screen help with your software
Select Help or ? when you’re using your software.
User’s Guide
Click the icon on your desktop (or in the Applications/Epson
Software/Guide folder on Mac OS X) to access the online
User’s Guide, software downloads, Epson Supplies Central
® ,
and more (requires an Internet connection). If you don’t have
a User’s Guide icon, you can install it from the CD or go to the
Epson website, as described below.
Epson technical support
Visit epson.com/support (U.S.) or epson.ca/support
(Canada) where you can download drivers, view manuals, get
FAQs, or e-mail Epson.
To speak with a support specialist, call:
U.S.: (562) 276-7282, 6 AM to 8 PM , Pacifi c Time, Monday
through Friday, and 7 AM to 4 PM , Saturday.
Canada: (905) 709-2567, 6 AM to 8 PM , Pacifi c Time, Monday
through Friday.
Days and hours of support are subject to change without
notice. Toll or long distance charges may apply.
Software technical support
Adobe ® Photoshop ® Elements
(800) 642-3623
www.adobe.com/support
Recycling
Epson offers a recycling program for end of life hardware
and ink cartridges. Please go to www.epson.com/recycle
for information on how to return your products for proper
disposal.
4121735 Rev.0
1-B
C
4121735 Rev.0
1-B
M
4121735 Rev.0
1-B
Y
4121735 Rev.0
1-B
K