Evolve Communications RD5000 - Manual (Page 20)

19 *Trademark
Remove a Device
You may remove a device from setup at any time. To remove a device from setup in
your
GUIDE Remote, perform the following steps:
1
2
4
Press the MENU key to enter
the Main Menu.
Highlight Remove a Device
and press the SELECT key.
If you really want to remove
this device, highlight
Yes and
press the SELECT key.
Getting Started
Note If you remove a DirecTune* device you will see a caution screen.
In addition, you will not be able to tune from within the TV Listings , or
access Interactivity Offers.
5 The device has been
removed.
Press the Right Arrow key.
Note If you highlight No and press the SELECT key or press the EXIT key at this
time, you will retain your current settings.
3
Highlight the device you want
to remove and press the
SELECT key.
Setup Remote Control