Flow meter control – Electrolux FOM 71 CLS User Manual
Page 157
Advertising

5
Failures
The water supply stops at about 8 litres.
•
Configuration wrong. Go through all configuration steps and correct.
Too much water (Approx. 30 - 40 litre). Flow control unit sends Alarm.
•
No signal from sensor to flow control unit.
•
Check cables.
•
Check that sensor wheel in the sensor unit rotates free. Can be easily
checked by removing the sensor housing and unscrew the 4 screws
holding the wheel.
Error message from flow control unit.
•
Error in stored values. Reprogram the unit.
Flow meter control
Advertising
This manual is related to the following products: