Primare CD22 CD player - Manual (Page 6)

C d 2 2 u s e r g u i d e

advanCed features
This chapter explains how to use the more advanced features of the CD22, and
how to play audio files from a CDR or USB disk. These functions are accessed from
the remote control.
C h a n g i n g t h e f r o n t
p a n e l d i s p l a y
You can choose how the time is shown on the
front panel display, and change the brightness.
To change the time display
• Press the DISP button..
The display switches between the following four
options:
Track and elapsed time for the current track
02 03-45 :.
Track and remaining time for the current track
02 01-15 :.
Track and elapsed time for the entire disc
02 18-45 :.
Track and remaining time for the entire disc
02 41-15 :.
To change the front panel display brightness
• Press the DIM button to step through the
three levels of illumination and blank.
r e p e a t p l a y b a C k
You can play the current track repeatedly, or
repeat the entire disc.
To repeat the current track
While the disc is playing:
• Press the REPEAT button.
The front panel shows a flashing T after the track
number:
12 T 65-43 :.
To repeat the entire disc
• Press the REPEAT button twice.
The front panel shows a flashing A after the track
number:
12 A 65-43 :.
To turn off repeat
• Press the REPEAT button again.
The T or A in the display will be cleared.
s h u f f l e p l a y b a C k
Shuffle playback plays the tracks on the disk in
random order.
To play the tracks in random order
While the disc is playing:
• Press the blue B button.
The front panel shows a flashing S after the track
number:
12 S 65-43 :
In shuffle mode you can pause a track by pressing
the >/= button or skip a track by pressing the ]
button.
To turn off shuffle
• Press the blue B button again.
The S in the display will be cleared.
p l a y i n g a s p e C i f i C
t r a C k
You can play from any track by entering the track
number on the remote control.
To play from a specific track
• Specify the track number by pressing one of
the buttons 1-9.
To enter a two-digit track number press the +10
button first. For example, to enter 16 press the
+10 button followed by the 1 and 6 buttons.
The display shows the track number:
04 00-00 :
u p s a m p l i n g
The CD22 allows you to upsample the 44.1kHz
signal from a CD to 48kHz, 96kHz, or 192kHz,
which improves fine detail, sound stage depth and
image separation.
• Press the red R button to select between
44K1, 48K, 96K, or 192K (recommended).
The display shows the current setting; for example:
FS 192K :