Qlima DD108 - Manual (Page 2)

CONTROL PANEL
1. POWER ON/OFF SWITCH BUTTON
This dehumidifier is with AUTO RESTART function after power cut.
Once the power is restored after a power failure, the appliance will restart automatically.
This dehumidifier is with the Anion generator. When you turn on the unit, it will releases
negative ions from air outlet automatically.
2. MODE – Fan Speed Setting
This dehumidifier offers you 3 Modes for your selection. The indicator light will illuminate
when the unit is operating in any of these modes. If the ambient humidity reaches the
desired setting, the indicator will flash, the heater will stop.
When you turn on the unit by main power, it starts on “AUTO” MODE.
Press “MODE” to select desired Speed.
Its path cycle should be: AUTO → SILENT → TURBO
AUTO – Automatic control the fan speed for the most comfortable ambient humidity.
SILENT – Quiet operation with low fan speed, especially at night.
TURBO – Operating with full speed for maximum performance and dry laundry function.
Restart the unit will be on previous setting.
3. TIMER
Press Timer button to select desired off-hours, 2, 4 and 8 hours.
If timer is not set (no timer indicator on), the unit will continuous running.
4. AUTO SWING – AUTOMATIC OSCILLATION
When you turn on the unit by main power, the oscillation louver will swing to up direction.
Press this button the oscillation louver will swing up and down. By pressing it again will
stop the louver at your desired position.