Ericsson W3X - Manual (Page 19)

W3x Series Overview
1/1551-CRH 102 168 Uen Rev A 2008-12-16 13
2.5.4.4 Built-in Ethernet Indicators
The Ethernet LAN connectors (Ethernet 1-4) have two built-in indicators
each.
The left indicator shows the speed of data traffic between the Ericsson W3x
and the connected client. If the speed is 100 Mbps, the indicator is green.
When the indicator is unlit, the speed is 10 Mbps.
The indicator to the right is yellow when a LAN connection is established
and flashes to show data traffic activity.
2.5.4.5 Standby Button
The Standby button at the bottom of the front shows steady blue when
the Ericsson W3x has finished the start-up procedure.
The button can be pressed to switch the Ericsson W3x to a standby (low-
power) mode (equal to when the Ericsson W35 is running on optional
battery power). The button shows red when the unit is in standby mode and
only phone services are available.