RISCO Group Agility 2-Way Wireless Keypad User Manual
Page 2
2
Figure 3
5. Close the battery compartment and mount the keypad to the mounting bracket in a reverse sequence to the removal.
MAIN USER OPERATIONS
The following list details the user operations from the 2-way wireless keypad. User operation can be defined to be activated by a quick mode or high
security mode that requires the use of a code or proximity tag.
In the high security mode the proximity tag can be used as a substitute for inserting a user code when the display prompts to "Insert a code".
COMMON OPERATIONS
Operation Quick Operation High Security Mode1
Full Set
(Away)
Press
Press
followed by
code or proximity tag2
Part Set
(Stay)
Press
Press
followed by code or proximity tag
Full Unset
(Disarm)
Press
followed by code or proximity tag
1. For optimal use of the proximity tag, use it from a distance of 1-2 cm from the center of the keypad's door.
2. For Part Setting (Away Arming) with no entry delay press the
key for two seconds
KEY OPERATION DURING PROGRAMMING MODE
Key
Description
Numerical keys are used to input the numeric codes that may be required for setting,
unsetting, or used to activate specific functions
Exits from the current menu and returns to Normal Operation mode
Confirms commands and stores data
Used to browse through the menu: Scrolls up a list or moves the cursor
Changes data
ADVANCED OPERATIONS
Operation1
Quick Operation
High Security Mode
Full Setting (Away)
partition 1/2/3
Select partition
/
/
and
press
Select partition
/
/
and press
followed by code or proximity
tag
Part Setting (Stay)
partition 1/2/3
Select partition
/
/
and
press
Select partition
/
/
and press
followed by code or proximity
tag
Unsetting (Disarming)
partition 1/2/3
Select partition
/
/
and press
followed by the code or the proximity tag
Panic alarm / Service call
Press both keys
simultaneously.
Fire Alarm
Press
simultaneously for 2 seconds
Emergency / Medical
Alarm
Press
simultaneously for 2 seconds
System Chime On/Off
Press the button
for 2 seconds
Main unit Speaker
Volume
Press the button
for 2 seconds
Select the volume level (0=No sound, 4=Full volume)
Press
to save your selection
Set keypad LCD contrast
Press
for 2 seconds. Use the
keys to adjust the keypad's display contrast and press