Epson EXPRESSION 1640XL - Manual (Page 16)

48 Automatic Document Feeder
9. Peel the backing from the stopper
and from the paper eject support
provided with the ADF. Then
attach the stopper and paper eject
support to the scanner as shown.
Insert the tabs on the paper eject
support into the slots at the right
end of the document table.
10. Close the ADF.
If you haven’t connected the scanner to your computer, see the Start Here sheet for
instructions.
Loading Paper in the Automatic Document Feeder
The ADF can hold up to 100 sheets of the following paper sizes, based on a paper
weight of 17 pounds (64 g/m
2 ) and a thickness of 0.2 inch (6.0 mm) or less:
Before loading the ADF, make sure the document:
■ Has no wet ink on it.
■ Has no holes or no cut-out areas.
■ Is not ripped or wrinkled.
■ Has no staples or other objects attached that may damage the feeder.
■ Has no folds.
■ Is not a multipart form.
There are two stoppers included with the ADF, a light gray one and a
dark gray one. Use the light gray stopper, not the dark gray stopper.
Paper size Direction
A3, Ledger, B4, Legal, A4, Letter, B5, A5, 5.5
× 5.8-inch (140 × 148 mm)
Portrait
A4, Letter, B5, A5 Landscape
Paper eject
support
Stopper
1640XL.book Page 48 Wednesday, November 19, 2003 8:46 PM