Sending a fax from the control panel, Other ways to dial a fax number – Epson WorkForce 645 User Manual

Page 19

Advertising
background image

Faxing a Document

19

Sending a Fax From the Control Panel

You can send a fax by manually entering a fax number, as described below.

Note: To dial the number using a telephone, by redialing, or by selecting from your
speed dial list, see the next section. To send a fax from your computer using the Epson
FAX Utility, see your online User’s Guide.

1.

Press the

Fax

button.

2.

Place your original(s) for faxing (see page 6).

Note: To scan a two-sided document (WorkForce 645 only), press the

2-Sided

button and select

On

.

3.

Use the numeric keypad to enter the fax number. You can enter up to 64 digits.

4.

To change fax settings, press x

Menu

and select settings as necessary.

5.

To send your fax, press the

B&W

or

Color

x

Start

button in the Fax section of the

control panel.

Note: If the recipient’s fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.

■

If you are scanning with the ADF, your document is automatically scanned and
faxed.

■

If you place your document on the scanner glass, you can scan additional pages
after the first one is sent.

■

If the fax number is busy, you see a redialing message and the product redials
after one minute. To redial immediately, press

Redial/Pause

.

To cancel faxing, press y

Stop

at any time.

Note: If you turn off the product, the following data stored in the product’s temporary
memory will be lost: received faxes that haven’t yet been printed, faxes scheduled to
be sent later, and faxes being retransmitted automatically.

Other Ways to Dial a Fax Number

Here are some other ways you can dial a fax number:

■ Redial/Pause

: Redial the last fax number you used.

■ Speed Dial

: Select or type the number of the speed dial entry and press

OK

. To use a

group dial entry, press the

Speed Dial

button twice.

■

If you’ve connected a telephone to the product, dial the number from the phone.
Select

Send

, then press the

B&W

or

Color

x

Start

button in the Fax section of the

control panel.

Note: Don’t hang up the phone until you begin transmitting the fax.

Advertising