RIGOL DG1000Z Series - Manual (Page 26)

RIGOL Chapter 1 Quick Start
1-8 DG1000Z User’s Guide
13. Waveforms Key
Output Sine with frequency from 1μHz to 60MHz.
—
The backlight turns on when this function is selected.
— You can set Freq/Period, Ampl/HiLevel, Offset/LoLevel and
Start Phase of sine waveform.
Output Square with frequency from 1μHz to 25MHz and variable
duty cycle.
—
The backlight turns on when this function is selected.
— You can set Freq/Period, Ampl/HiLevel, Offset/LoLevel,
Duty Cycle and Start Phase of square waveform.
Output Ramp with frequency from 1μHz to 1MHz and variable
symmetry.
—
The backlight turns on when this function is selected.
— You can set Freq/Period, Ampl/HiLevel, Offset/LoLevel,
Symmetry and Start Phase of ramp waveform.
Output Pulse with frequency from 1μHz to 25MHz and variable
pulse width and edge time.
—
The backlight turns on when this function is selected.
—
You can set Freq/Period, Ampl/HiLevel, Offset/LoLevel,
Width/Duty, Leading, Trailing and Start Phase of pulse
waveform.
Output Gauss Noise with 60MHz bandwidth.
—
The backlight turns on when this function is selected.
—
You can set Ampl/HiLevel and Offset/LoLevel of Noise.
Output Arbitrary waveform with frequency from 1μHz to 20MHz.
—
Support Sample Rate and Frequency output modes.
—
Up to 160 built-in waveforms and support powerful
arbitrary waveform editing function.
—
The backlight turns on when this function is selected.
— You can set Freq/Period, Ampl/HiLevel, Offset/LoLevel and
Start Phase of arbitrary waveform.